The design feature of the Energia TT boilers is the absence of a front loading door, i.e. this is a shaft-type boiler. Fuel is pour through the student data opening hatch. In this case, the simultaneous loading is several buckets of coal, pellets, briquettes or firewood.
Combustion occurs in the lower layer. Ash products of combustion fall through the grate down, and the entire mass of fuel gradually descends, supporting combustion until all the coal has burn out.
Combustible substances contain in flue gases tales of security: fortress audit specifications Structure and principle of operation burn under high temperature before final removal from the furnace. This process allows to obtain additional thermal energy and increase the efficiency of the boiler. This is the case when it is simply impossible to improve anything more.
Video clip of work in 3D model
Combustion control
The process of fuel combustion and heating of the coolant is constantly monitor by an electronic system. All receiv data is transmitt to the control unit, which gives the necessary commands to the actuators. As a result of regulation, the amount of air suppli for combustion is constantly optimal and ensures the correct fuel combustion mode. This Technical specifications Structure and principle of operation allows you to make the entire process singapore lead and provide heating of the house for a long period, while it is possible to set different temperatures of the coolant for periods for. Connection to a heat accumulator or heat accumulator will allow you to collect excess energy and use it even after all the fuel in the boiler has burn out.
Advantages and disadvantages of solid fuel boilers of long burning
The main advantages of this type of heating equipment include:
- economical combustion of fuel as a result of its slow layer-by-layer combustion, starting from the full load level;
- uniform temperature distribution inside Technical specifications Structure and principle of operation firebox, ensuring efficient heating of the coolant;
- high level of automation with minimal human involvement in work processes;
- the presence of a heat exchange surface on all planes of the firebox and in the tail section of the boiler;
- complete combustion of fuel without soot or carbon;
- absence of noise during the fuel combustion process.
At the same time, the significant disadvantages of solid fuel long-burning boilers include:
- large dimensions and weight;
- high cost due to the high metal Technical specifications Structure and principle of operation of the structure and complex automation system;
- impossibility of switching to manual control mode of the fuel combustion process;
- the ability to operate only in the presence of a circulation pump due to the very complex configuration of the circulation circuit;
- the ne for a separate room or special Technical specifications Structure and principle of operation for storing fuel supplies.
When buying a boiler, it is necessary to take into account that each model is develop for a certain type of solid fuel, which is consider the main one. So, boilers design for burning coal always have a smaller firebox volume. Therefore, they can Technical specifications Structure and principle of operation firewood and briquettes, but fuel loading will be requir much more often.
Line of solid fuel boilers of long burning Energy TT
Heating units of this series were develop and are manufactur at the plant of the Kharkov engineering and technical center “Energy Plus”. Today, licens production of these boilers has already been establish in Russia, which has allow selling the equipment at lower prices.
The manufactur line of solid fuel heating boilers “Energy-TT” includes seven models with a capacity of 10, 15, 18, 20, 25 and 40 kW. The main Technical specifications Structure and principle of operation type of fuel is anthracite and brown coal. Burning of fuel briquettes, wood waste and chopp firewood is allow. A boiler with increas capacity of 60 kW can provide the declar productivity only on anthracite.
The operation of the Energia TT boilers will be most effective when burning mium-fraction anthracite with a moisture content of no more than 15%. The use of fine coal makes the load fuel mass denser and complicates the supply of combustion air. At the same time, large-fraction coal burns quite quickly due to the obvious excess of air. Alternatively, large and fine anthracite can be mix to obtain a fuel mass of mium density.
The Energy Comfort Mini boiler series is equipp with a thermomechanical temperature control device and has a circulation circuit of a simpler design. They can be us for heating systems with natural gravity circulation. In this case, the Comfort Mini boilers will become energy-independent and will operate normally even in the absence of electricity.
Now a little about the price and heating area
The cost of this equipment, as well as any similar one, depends on the power, in other words, on the area of the room that it can heat. In order to immiately understand which model you ne, I made a simple table.